Noise Control Help Line:   +971 4331 0000 |   MENA & GCC Region
Acoustical | Surfaces

Since 1980

|

Sound proofing

|

Acoustics

|

Noise & Vibration Control

Acoustical | Surfaces

Noise S.T.O.P. FABRISORB™

Decorative Fabric Wrapped Custom Acoustical Wall Panels

High Performance
Architecturally Decorative
Custom Engineered & Manufactured
Reduced Noise & Reverberation
100% Custom Colors and Sizes

Fabric Wrapped Panel Installation Tutorial

Note: If using E.C. clips to mount these fabric wrapped acoustical panels to the ceiling, the installer must use construction adhesive on each clip so the clips do not slide apart. It is also advised to toe-nail the acoustic wall tile into place, or use trim around the perimeter to make sure that the clips adhere together correctly.

Product Photos


Product Specs

Material 6 lb. density glass fiber with woven fabric and micro-perforated vinyl facings.
Pattern Flat-faced with square or radiused corners, beveled, radiused or mitered edges.
Features Custom designed and manufactured to meet every need. Soft or hard edges.
Applications These decorative sound absorbing panels are great for offices, schools, meeting rooms, music rooms, hotels, auditoriums, recording studios, broadcasting studios. Any space where good speech privacy or speech intelligibility is important.
Thickness 1″, 1-1/8″, 2″, 2-1/8″.
Sizes Custom Up to 4′ × 10′.
Colors A wide range of standard colors and custom colors are available for woven fabrics and perforated vinyls.
Flammability ASTM E84, Class A. Flame Spread: 15; Smoke Developed: 40.
Installation Adhesive, Hook & Loop Fasteners, Mechanical Clips, Impaling Clips, magnetic clips.
product High performance absorption
product Absorptive in high traffic areas
product For combined use in Studios for absorption and reflection
product Multi-purpose panel for absorption and sound blocking
product For gymnasiums, absorption and abuse resistance
product For long lasting and effective tackability
product High absorption and tackability
product Tackability where sound absorption is not necessary
product Barricade vinyl barrier, ideal for areas requiring high STC

Reverberation Demonstration

Fabrisorb™ Wall panel – Sound Absorption Coefficients

6-7 PCF Glass Fiber 125Hz 250Hz 500Hz 1KHz 2KHz 4KHz NRC
1″ .14 .27 .80 1.11 1.14 1.14 .85
2″ .22 .81 1.24 1.30 1.21 1.16 1.15

Edge Details

product
product
product
product
Impaling Clips and Adhesive
One impaling clip is needed for each mounting locationImpaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
Impaling Clip
Install Location Wall
Parts Included (1) × Impaling Clip
Recommended Adhesive
(sold separately)
Titebond Green Choice Adhesive (ASTSA28)
Part Number HWIMP33

 

Fabric Wrapped Panel Hardware Pack – Impaling Clip
One hardware pack is needed for each mounting locationDrywall anchors are installed into the drywall and the screws hold the impaling clip to the anchor. Impaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
Fabric Wrapped Panel Impaling Clip Hardware Pack
Install Location Wall
Parts Included (1) × Impaling Clip
(2) × Drywall Anchors
(2) × ¾″ Screws
Recommended Adhesive
(sold separately)
Titebond Green Choice Adhesive (ASTSA28)
Part Number HWFWPIMP

 

Fabric Wrapped Panel Hardware Pack 1
One hardware pack is needed for each mounting locationThe drywall anchors are installed onto the drywall and the screws hold one of the plastic clips to the wall. The remaining ¾″ screws are used to mount the remaining plastic clip to the mounting plate on the back of the panel. Adhesive can be used to hold the clips together to prevent the clips from detaching from one another.
Fabric Wrapped Panel Hardware Pack 1
Install Location Wall or Ceiling
Parts Included (1) × Mounting Plate (factory-installed on the back of the panel)
(2) × 3″ Plastic Z-bars
(2) × Drywall Anchors
(4) × ¾″ Screws
Part Number HWFWPHP1
Note Plastic clips are also available in 21″, 47″, and 96″ lengths.

 

Fabric Wrapped Panel Rotofast Standard Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Standard Anchor is screwed to the wall. Mark anchor locations on panel. Push metal insert into anchor body. Position panel at pre-marked locations and push hex tool through panel face to engage anchor. Turn clockwise approximately two revolutions. Pull the driver out.For panels with tightly-woven fabric, leather, vinyl, or other specialty covering, the Rotofast Snap-On Anchor is recommended.
Fabric Wrapped Panel Rotofast Snap-On Anchor Kit
Install Location Wall
Parts Included (1) × Rotofast standard anchor
(1) × Wall anchor
(1) × 2″ #8 Screw
(1) Rotofast standard hex tool
(1) Rotofast standard driver tool
Note Multiple kits ordered together will only include (1) Rotofast standard hex tool and (1) Rotofast standard driver tool.

 

Fabric Wrapped Panel Rotofast Snap-On Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Snap-On Anchor is screwed into the back of the panel. The marking plug is inserted into the anchor, then panel is pushed against wall to mark anchor locations. The ratchet is screwed into the wall at marked locations. Firmly push panels onto ratchets to complete installation.
Fabric Wrapped Panel Rotofast Snap-On Anchor Kit
Install Location Wall or Ceiling
Parts Included (1) × Rotofast snap-on anchor with ratchet
(1) × Marking plug
(1) × Wall anchor
(1) × 2″ #8 Screw
(1) Rotofast Snap-On Hex Tool
Note Multiple kits ordered together will only include (1) Rotofast Snap-On Hex Tool and up to (6) Marking plugs.